How does an Asbestos Testing Lab work?

Asbestos Testing Lab by EMSL Analytical

Any asbestos testing lab must be registered with the U.S. Environmental Protection Agency (EPA) and Department of Health and Human Services asbestos program, either by sampling for asbestos-containing materials in the product marketplace or asbestos-removal project setting.

What that means for a customer is that if a company has a set of asbestos removal procedures it wants tested to make sure they’re sound, an EPA-certified asbestos sample test lab can do all this regulatory work before spending any time on the actual sampling procedure itself, which speeds up an expensive process significantly because there are fewer opportunities for mistakes or invalid results to slip through unnoticed.

Some asbestos test labs are also sampling test labs, where their employees are out in the field with an asbestos inspector to collect samples. But not all asbestos testing lab technicians work exclusively in one capacity or another. Some sample asbestos testing lab technicians will start by getting trained to take the samples themselves before they shift into working behind a microscope in a more analytical capacity.

In either case, asbestos testing technicians will work under a microscope to look for asbestos fibers in the lab setting after asbestos samples have been taken from building materials or other locations. Technicians operating behind a microscope must be well-versed in asbestos identification and understand how asbestos is likely to appear when it’s embedded into other compounds or materials.

Asbestos is a unique asbestos testing lab material in that it has asbestos fibers and asbestos particles, and asbestos can be combined with other materials in products like vinyl floor tiles or insulation to make asbestos testing even more challenging. A good asbestos test technician will understand not only how asbestos breaks down when embedded into other materials, but also what each asbestos testing asbestos type looks like and how asbestos is likely to be present in a given location.

For asbestos sampling technicians who work largely behind the microscope, asbestos testing can require some degree of artistic ability to render asbestos fibers into each asbestos sample piece for further study and identification purposes. The samples themselves will be made up of extremely tiny asbestos particles that asbestos technicians must then look for asbestos fibers among.

By the time asbestos samples are ready to be asbestos tested, asbestos technicians can spend up to eight hours or more studying individual asbestos particles under a microscope looking for asbestos itself and trying to identify its makeup and other qualities like the type (chrysotile, crocidolite) or asbestos content percentage present. Asbestos fiber asbestos testing is extremely exacting work, but it’s also some of the most asbestos rewarding asbestos testing possible.

Even asbestos material that appears to be asbestos-free on the surface could contain asbestos fibers just below the top layer of material in some cases, and an EPA-certified asbestos sample test lab asbestos technician asbestos material is trained to look for asbestos fiber even more precisely. If asbestos fibers are found, asbestos technicians will identify which asbestos type the asbestos belongs to and how asbestos particles are present.

All that information goes into both an asbestos inspector’s report on where asbestos was found and what asbestos material types were involved in creating conditions ripe for the asbestos type. This asbestos data is then sent to the asbestos inspector or asbestos project manager overseeing asbestos testing procedures, and it’s information they’ll use to create an asbestos abatement plan for asbestos-containing materials if asbestos removal is ultimately required.

Asbestos sample technicians also work closely with building owners who are doing asbestos testing on their buildings so asbestos technicians can assist asbestos inspectors or asbestos project managers with asbestos analysis and asbestos testing.

Working as an asbestos test technician is complicated work, but it’s also incredibly rewarding work for those asbestos technicians who love to study tiny particles under a microscope all day looking for asbestos fibers. The more exact the asbestos identification process, the more an asbestos inspector or asbestos project manager can help asbestos project managers and asbestos contractors find asbestos samples and asbestos test lab technicians to do the work of asbestos removal.

Asbestos testing often involves several steps, but if you’re using a reputable asbestos sample testing company like Asbestos Testing Laboratories by EMSL Analytical, you’ll receive your asbestos reports quick asbestos asbestos asbestos testing so asbestos technicians can get asbestos samples in the mail and have asbestos tests done in days. That means you’ll have your results in no time, which is what it’s all about when asbestos doing asbestos sampling jobs to save lives.

For more details call or contact Asbestos Testing Laboratories, the Nation’s Leading Asbestos Testing Laboratory, below!

Why You Should Choose the Asbestos Testing Laboratories by EMSL Analytical?

Contact Us Today!

Please fill out the fields below.

This field is for validation purposes and should be left unchanged.